feat(gui,cli): 弹射后等待增加开关控制，版本升至0.6.0

- GUI: 弹射后等待改为勾选框+微调框模式，与热床降温统一
- CLI: 新增 --no-eject-wait 参数跳过弹射等待
- 不勾选时 wait_after_eject_seconds=0，build_swap_block 跳过 G4
- __init__.py: 版本号 0.5.0 → 0.6.0

a1_swap_mod_packer/gui.py

@@ -523,12 +523,18 @@ class MainWindow(QMainWindow):
         bed_row.addWidget(QLabel("°C"))
         bed_row.addStretch(1)
 
-        # 弹射后等待时间
+        # 弹射后等待时间（勾选后启用，不勾选则不插入等待指令）
+        self.eject_wait_check = QCheckBox("弹射后等待")
+        self.eject_wait_check.setChecked(True)
         self.wait_spin = QSpinBox()
         self.wait_spin.setRange(0, 3600)
         self.wait_spin.setValue(45)
         self.wait_spin.setSuffix(" 秒")
         self.wait_spin.setFixedWidth(96)
+        eject_wait_row = QHBoxLayout()
+        eject_wait_row.addWidget(self.eject_wait_check)
+        eject_wait_row.addWidget(self.wait_spin)
+        eject_wait_row.addStretch(1)
 
         # 剩余时间板号显示
         self.show_plate_number_check = QCheckBox("在剩余时间的百位显示当前板号")
@@ -592,7 +598,7 @@ class MainWindow(QMainWindow):
 
         # 第 2 行：弹射后等待 | 剩余时间板号
         grid.addWidget(QLabel("弹射后等待时间"), 2, 0)
-        grid.addWidget(self.wait_spin, 2, 1)
+        grid.addLayout(eject_wait_row, 2, 1)
         grid.addWidget(QLabel("剩余时间板号"), 2, 2)
         grid.addWidget(self.show_plate_number_check, 2, 3)
 
@@ -700,6 +706,8 @@ class MainWindow(QMainWindow):
         self.default_copies_spin.valueChanged.connect(self.save_current_settings)
         self.bed_cooldown_check.stateChanged.connect(self.save_current_settings)
         self.cool_bed_spin.valueChanged.connect(self.save_current_settings)
+        self.eject_wait_check.stateChanged.connect(self.save_current_settings)
+        self.eject_wait_check.toggled.connect(self.wait_spin.setEnabled)
         self.wait_spin.valueChanged.connect(self.save_current_settings)
         self.show_plate_number_check.stateChanged.connect(self.save_current_settings)
         self.swap_final_check.stateChanged.connect(self.save_current_settings)
@@ -720,6 +728,7 @@ class MainWindow(QMainWindow):
         self.default_copies_spin.setValue(int(options.get("default_copies", 1)))
         self.bed_cooldown_check.setChecked(bool(options.get("bed_cooldown_enabled", True)))
         self.cool_bed_spin.setValue(int(options.get("cool_bed_temp", 45)))
+        self.eject_wait_check.setChecked(bool(options.get("eject_wait_enabled", True)))
         self.wait_spin.setValue(int(options.get("wait_after_eject_seconds", 45)))
         self.show_plate_number_check.setChecked(bool(options.get("show_plate_number", True)))
         self.swap_final_check.setChecked(bool(options.get("swap_after_final", True)))
@@ -755,6 +764,7 @@ class MainWindow(QMainWindow):
             "default_copies": self.default_copies_spin.value(),
             "bed_cooldown_enabled": self.bed_cooldown_check.isChecked(),
             "cool_bed_temp": self.cool_bed_spin.value(),
+            "eject_wait_enabled": self.eject_wait_check.isChecked(),
             "wait_after_eject_seconds": self.wait_spin.value(),
             "show_plate_number": self.show_plate_number_check.isChecked(),
             "swap_after_final": self.swap_final_check.isChecked(),
@@ -1303,11 +1313,12 @@ class MainWindow(QMainWindow):
         if not swap_gcode_path:
             raise ValueError("请在 swap_gcode 文件夹中放入至少一个换料 G-code 文件并选择它。")
         cool_bed_temp = self.cool_bed_spin.value() if self.bed_cooldown_check.isChecked() else None
+        eject_wait_seconds = self.wait_spin.value() if self.eject_wait_check.isChecked() else 0
         return BuildOptions(
             swap_gcode=Path(swap_gcode_path),
             output_3mf=output_path,
             cool_bed_temp=cool_bed_temp,
-            wait_after_eject_seconds=self.wait_spin.value(),
+            wait_after_eject_seconds=eject_wait_seconds,
             show_plate_number=self.show_plate_number_check.isChecked(),
             swap_after_final=self.swap_final_check.isChecked(),
             metadata_mode=self.metadata_combo.currentData(),